6 Lane Compac - Apple Sorter with Weight, Colour Grading & Dimension Sizing
|
Available for immediate sale
Location: Hawkes Bay, New Zealand
Specifications:
- 6 lane Compac
- Metering elevator
- 2 x roller rotation sections
- 1 controlled roller rotation section for singulation
- 1 controlled roller rotation section for vision inspection
- Weight sizing
- InVision 5000C - colour grading and dimension sizing
- Packers reject and all-tip return conveyors
- New computers installed in 2006
- New analogue cameras installed in 2006
- 28 Outlets with staggered apple chutes
- 10 x single tray fillers
- 14 x back to back tray fillers
- 620mm wide belts
- Mild steel construction
- Height adjustment in pairs
- Swivel carton stand for carton transfer
- Sensor or sizer control for automatic indexing
- Independent drive for each tray filler
- 3-phase conductor, relay and timer
- Packers rejects conveyors above the tray fillers
Originally installed in 2000. This machine has been used during 8 export apple seasons. It has not been worked hard and has been well maintained.
Purchase Price: NZ$350,000 excludes the bin fillers (This is less than half the cost of a fully new replacement system)
*The bin fillers may be available at an additional price*
Available for shipment: The line is able to be shipped in containers to any place in the world.?Compac can be contracted to load and re-install the equipment at its new location.
Contact: Allan Mouat +64 21 503 307 allanm@compacsort.com
|
|
|
Compac 2 Lane PSF Weight Sizer - Australia
|
A 2 lane PSF sizer is available for immediate sale
Location: Queensland, Australia
Specifications:
- 2 Lane V load belts
- All new APS cups, solenoids, chains and control program at the beginning of 2009
- Weight sizing
- 28 powered outlets
- 8 x rotary bins on each side of the machine
- 6 x volume fill outlets on each side of the machine including doors
- Waste/down-grade conveyor on one side of the machine
- 16 tray packing stands for rotary bins
- Carton filling stands for volume filling outlets
- 19 metres (approximate) of powered full carton conveyor
Purchase Cost: AUD$50,000 as is/where is
Available for shipment: The line is able to be shipped in containers to any place in the world.
Contact: Grant Konias - +61 418 269 233
email: aussales@compacsort.com
|
|
|
Compac Single Lane Sorter - Australia
|
Single Lane Compac Sorter - available for immediate sale
Location: Near Adelaide, South Australia
Specifications:
- In-feed conveyer approximately 1.5 meters long
- Weight sizing
- InVision 5000C colour and dimension grading
- 2 x waste bin conveyers that are approximately 1 meter long
- Brush transfers from carriers to rotary tables
- 8 outlets to rotary tables
- New chain with zero hours
Purchase Cost: AUD$50,000 as is/where is
Available for shipment: The line is able to be shipped in containers to any place in the world.
Contact: Grant Konias - +61 418 269 233
Email: aussales@compacsort.com
|
|
|
Complete 2 Lane Peach Line
|
Complete 2 Lane Peach Line - available for immediate sale
Location: Alabama, USA
Specifications:
- Dump conveyor for small totes
- Roller elevator with 2nd grade conveyors
- Peach washer
- Peach waxer
- 2 lane Compac Sorter with Invision 5000
- 8 return flow packing conveyors (4 on each side of sorter)
- Delivery system for empty cartons
Purchase Cost: USD$65,000 as is/where is
Contact: Jody Jackson - +1 772 473 1625
Email: jodyj@compacsort.com
|
|
|
Split Belt Tray Fillers - 20 Tables
|
Split Belt Tray Fillers - available for immediate sale
Location: Victoria, Australia
Specifications:
- 20 tables in total with dead plates
- 2 centre downgrade per pair of packtables
Purchase Cost: AUD$45,000 as is/where is
Contact: Grant Konias - +61 418 269 233
Email: grantk@compacsort.com
|
|
|
Compac 4 Lane 29 outlet MLS with Compac Trayfillers
|
Available for immediate sale
Location: South Island, New Zealand
Specifications:
- 4-lane Compac weight sizer with Dual side tipping
- 4-lane 1,695mm metering elevator (pre-singulator from dry belt)
- V-belt singulation system
- Diverging belt gentle carrier loading system for apples
- Extended fruit rotation system for final singulation
- Second rotation system for colour & dimension sorting
- Spill belts between lanes for gentle recycling of non-singulated fruit
- Compac Invision 5000 colour and dimension sorting system
- Electronic weighing system with 2 load cells per lane
- PC with screen, keyboard, mouse and printer
- Compac Advanced Sizer Software and electronics
- Modem and software for remote access servicing of machine
- Interface for three Sinclair labelling heads
- Computer system with Compac Version 10 advanced sizer software
-
29 fruit outlets including cross conveyors.
- 1 x unders outlet to extended lower recycle belt
- 3 x bin filler outlets to distribution belt for FHS rotary bin fillers
- 1 x QC outlet / Bin filler for fruit sampling on request
- 8 outlets with transfer accumulation plates to single Compac trayfillers
- 16 outlets with transfer accumulation plates to pairs of Compac trayfillers
- 24 x Compac mild steel tray fillers with single belts and drives
- Full length recycle from all tip plus packers reject belt with widened and extended lower belt for unders fruit.
- Service and inspection trolley
- Semi-auto silicone lubrication system
- Carrier Cleaning system
Extras Included
- New Sizer Pc with latest Compac software Version 10 and Invision software.
- New Cameras and looms for Invision system.
- Existing Vari speed drives for sizer motors
- Compac 12 month warranty on all electronic parts
- Packing of sizer into containers ready for shipping
Originally installed in 2002. This machine has been run for approximately 117 weeks of production.
Purchase Cost: NZ$425,000
The above prices do not include:
- Infeed systems of any kind
- Bin fillers or full carton conveyors
- Reject removal system other than specified
- Conveyors other than specified
- Any electrical system
- Electrical control box or equipment, wiring, installation or connection
- Any taxes or duties applicable (GST)
Available for shipment: The line is able to be shipped in containers to any place in the world.Compac can be contracted to load and re-install the equipment at its new location.
Contact: Allan Mouat +64 21 503 307 allanm@compacsort.com
|
|
|
For further details on any of these machines, or if you have other requirements that we may be able to assist you with, please contact us directly.
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)